Pelican Kayak, Project

[fishinone]

I found a Pelican kayak listed on Craigslist for $40. It has a 3 foot split in the seam on the port(left) bow.

I went an checked it out last night and wound up getting it for $30.


I don't know yet what model it is yet but it's about 10ft long. On the aft deck it has a screw out deck plate, the cover for it is missing.

My plan is to take every thing off of it so that I can repair the seam and make some modifications like adding a bait well, rod holders, tackle tray storage and a trolling motor.

It's all scratched up. It looks like it might have spent some time washing up against a bank or something but it can be made serviceable.

It's perfect for cutting holes in.

I paid $30 for the Kayak last night then bought $50 worth of tools and material to fix it this morning.

I'll post updates here as the project progresses.

[vanillagurilla]

Time to weld some plastic! Btw it smells bad if thats what your doing lol.

[viperman100]

That boat had been on craigslist for a couple days now and I almost went for it, but 1- I already have two kayaks and 2-I dont know how to weld plastic so I dont know that I could have fixed it anyways, I probably would have tried resin and fiberglass matting but who knows if that would have worked.

Good luck with the project hope it all works out.

[reservoir dog]

Not a bad investment. Post pics as your project comes along.

[fishinone]

Time to weld some plastic! Btw it smells bad if thats what your doing lol.

I'm going to weld it. I'm planning to do it outside in the back yard.

That boat had been on craigslist for a couple days now and I almost went for it, but 1- I already have two kayaks and 2-I dont know how to weld plastic so I dont know that I could have fixed it anyways, I probably would have tried resin and fiberglass matting but who knows if that would have worked.

Good luck with the project hope it all works out.

Thank you,

Before I went and got it I watched some youtube videos and looked at instructions at the link below.

http://www.urethanesupply.com/kcwelder.php

I ordered yellow material and stainless steel screen here but I ordered Harbor Freight's cheapest plastic welder.

http://www.harborfreight.com/plastic...ron-67102.html

I'm pretty handy, it should come out OK.

Not a bad investment. Post pics as your project comes along.

Thanks, I'm planning to start with damage pics, after I get it set up on saw horses in the back yard.



It just occurred to me that I should use material that I remove as I make my modifications, for the welding. The color should match.

[viperman100]

definately do a photo repair thread so others can benefit from the step by step instructions.